Transom Mount

How to Mount Your Fish Finder Transduer

There are several different methods you can use to mount your fish finder.  In this article mounting refers to attaching the transducer to your watercraft- boat, kayak, float tube, etc.  “Mounting” your fish finder display is a separate topic. The common methods are: transom mount, thru hull, and portable mounts.  There is also a “Shoot Thru” hull mounted transducer, but this type is less common. 

 

As the name suggests, a transom mount model mounts on the transom of the boat.  The best mounting location is at the bottom of the transom, with the transducer face (bottom) parallel or nearly parallel to the transom itself.  All major manufacturers recommend that installation be completed out of the water. In order to minimize turbulence and aeration around the unit, do not mount the transducer along strakes, behind thru hull fittings or other hull irregularities as they can cause unusual disturbances around the transducer and cause improper readings. 

 

Thru Hull units, when properly installed, typically offer better fish detection and overall performance than other mounting methods.  Since this mounting method requires drilling or cutting a hole through the hull, all thru hull installations should be completed while the boat is in dry dock.  As with transom mounted models, thru-hull transducers should be completely submerged in water with good water flow through the unit.  Objects such as strakes, fittings and propeller wash can disturb the water flow and cause inaccurate readings.  Work to avoid any areas where the water flow will be uneven or disturbed.    To eliminate leaks it is imperative to seal any holes between the transducer and hull.  It is generally best to have a professional install a thru-hull model.

 

Portable fish finders are the easiest to install, if they need any installation at all.  Some portable fish finders have a transducer with a suction cup mounting system.  Just take these models and stick the suction cup to your boat, kayak or float tube beneath the water line so that they are completely submerged.  Again, make sure the transducer can have free, uninterrupted water flow.  Humminbird also makes a line of portable fishfinders that use a clamp to attach the entire fish finder to your watercraft.  The transducer is at the bottom of the fish finder shaft and will be submerged as all transducers should be. 

 

There are also some portable fish finders that need no mounting at all.  The Humminbird SmartCast series has a remote sensor fish finder that is wireless.  Simply attach the sensor to your fishing line and cast it along with the bait.  It will provide signals back to the display so you can see if there are any fish near your line.  This type of fishfinder is an excellent choice for shallow water fishing.

 

The last mounting method is the “Shoot thru” transducer.  Unlike thru-hull models, shoot thru models do not require a hole in the boat’s hull.  Instead the unit is placed inside the hull and transmits and receives signals from there.  This type of fish finder works only with fiberglass hulls and as with other methods, placement is critical.  Usually a flat spot in the aft bilge area is the best location, but check with a professional. 

 

There are several ways to attach a shoot thru model.  They can be bolted on or some can be fiberglassed or epoxied to the hull.  There are also some shoot thru models that are encased in a special enclosing.  A professional can help you choose the right method for your fish finder and your boat.

 

Fish finder mounts can be difficult depending on the type.  If you have any doubts about how to mount your model, it is always best to get professional help.

About the Author

Karen Janos is an expert on fish finders. When she is not fishing she is the webmaster for http://www.fishfindersdirect.com.

AIRMAR High Performance 1kW Transom Mount Transducers at 50 MPH.AVI

Craftsman Laser TracTM Level with Carrying Case and Laser Enhancing Glasses $18.95 Laser TracTM level is a highly versatile laser tool that replaces the traditional pencil line, carpenter's mark and chalk line. Includes precision leveling base, tripod mount base, wall mount base. Projects a laser line vertically, horizontally, or at any angle in-between Can be used 5 different ways: precision levling base on any 4 x 6 in. surface, With the tripod mount base on any standard camer...

Ocean LED OCE-001-500351 Amphibian A12 Pro Surface Mount Underwater Light (White) $1,099.99 Amphibian A12 Pro The Amphibian Pro Series raises the bar on the original Amphibian range with an increase in brightness by 75%! The A12Pro underwater light rivals any 50 watt Xenon on the market and with 8 times the power savings. The Amphibian Pro Series is for underwater use only however due to its Active Thermal Control a built-in temperature monitoring system they can be used while under way....

CRL Chrome Beretta Transom/Wall Mount Pivot Patch by CR Laurence $255.18 For Use With 3/8" to 1/2" (10 to 12 mm)Thick Tempered Glass Available in Polished Chrome and Brushed Nickel Finishes Non-Handed This Beretta Transom/Wall Mount Pivot Patch provides both the Top Door Patch and the Top Pivot for your door when a transom is used. It attaches to both the transom and the wall, or jamb, for rigidity. Additional Beretta Fixed Glass Fittings or an alternate method of atta...

Quality Product By Garmin - Transom Mount Transducer $142.36 Quality Product By Garmin - Transom Mount Transducer Garmin 010-10192-01 Transom Mount Transducer Displays Depth, Temperature & Speed ; Operating Frequency Of 200 Khz & 50 Khz; Beamwidth: 12° At 200 Khz; 45° At 50 Khz...

GARMIN 010-10192-01 TRANSOM MOUNT TRANSDUCER $179.59 DISPLAYS DEPTH TEMPERATURE & SPEED ; OPERATING FREQUENCY OF 200 KHZ & 50 KHZ; BEAMWIDTH: 12 AT 200 KHZ; 45 AT 50 KHZ...

LOWRANCE ELITE-5X FISHFINDER COLOR 83/200 TRANSOM MOUNT Super-Bright Color Display Best brightness, contrast, resolution for superior viewing Fully adjustable screen and keypad CCFL backlightLegendary Lowrance Sonar Performance 4,000 W PTP, 500 W RMS; depth to 1,000' (305 m) 83/200 kHz, 20/60 degree Skimmer transducer w/temp Unique Trackback feature for sonar history scroll-backPlus.. Easier-to-use menus with Advanced User Mode feature New case/mountin...

Intex Motor Mount Kit $20.30 Intex Motor Mount Kit lets you attach up to a 3.5-horsepower motor to the rear of your Intex boat, so you can rest your paddling arms and float in comfort. The mount--which is made of marine plywood with aluminum support arms--attaches and detaches easily, so you don't have to spend a half hour fussing with the components each time you want to use the motor. Plus, the mount disassembles quickly wh...

The Fishfinder Blog
Happy Fishing!

Incoming search terms:

• eagle fishmark 500c
• how to flush mount lowrance elite 4 fishfinder
• humminbird 561 installing transducer
• portable transducer transom mount

Related posts:

1. Land Fish Finder
2. Humminbird Piranha
3. Hawkeye F33p Fish Finder
4. Using Fish Finder
5. Cuda Fish Finder
6. Lowrance Gps Fishfinder
7. Eagle Fish Finder Transducer
8. Portable Sonar